A look at current mobile display technologies

display types comparison

In the smartphone industry, the display is a large part of what makes or breaks a device. I mean, without the display how would we use a smartphone? So often when manufacturers release their device, they throw around terms like “Super AMOLED” and “Retina Display”. What do this terms mean? Does a display type really matter? Let’s break it down.

In this article some terms will be used to explain these displays. Resolution can be explained in this article.

Another term will be ppi, or pixels per inch. This is calculated by a complicated equation that we won’t get into. The important thing to know is that ppi is the amount of pixels within a square inch of a display. so the higher the ppi, the better. It’s worth noting that the larger the display, the lower the pixel density. So while a 6-inch screen and a 4-inch may both have 1080p resolutions, the 4-inch is going to have a higher pixel density (~550 ppi) while the 6-inch is going to have a lower pixel density (~367 ppi).

Two types of display: LCD & LED


A close up of an LCD screen

Essentially, mobile displays can be broken down into two major categories: LCD and LED. LCD, or Liquid Crystal Display, is essentially a liquid crystal solution sandwiched between two sheets of a polarizing material, which causes light to pass through in various amounts when an electric current passes through the liquid. High-end LCD displays are cheaper to make than LED displays (more on that in a moment), and provide sharp pictures and a wider color range. LCD displays require a backlight behind the entire display however, which can result in a thicker display (though these days that hardly matters). This backlight also needs to always be on, even if you have a white square on a black background. This results in blacks looking more like a very dark grey, and more battery drain (compared to an LED).


A close up of an AMOLED screen

LED, or Light Emitting Diode, is technically a type of LCD, but no need to get into that (if you really need to, check out this article or this article). LED displays can control light passing through every pixel, which results in colors that pop and are more realistic, and blacks being true blacks. Because this display doesn’t require a backlight like a LCD does, these displays are also thinner. This also means LED displays are more energy-efficient, as pixels can be turned off while still using the display (this is how Moto Display works on the Moto X). Nevertheless, LED screens are harder to mass-produce than LCDs (though again, this is starting to not be the case).

Now most (if not all) smartphones that use LED technology use OLED (Organic Light Emitting Diode). This just means the material between the two polarizing sheets are carbon-based.

Now that we’re through that, it should help explain all the various types a little better.



TFT LCD were easily the most-used displays back in 2011 and before. TFT stands for Thin Film Transistor. This improved upon early LCD technology, providing better viewing angles. However, it was a power-hog, and became outdated with the introduction of IPS LCDs. Still, some budget phones use them today because of how cheap they are.

  • Examples of phones with TFT-LCD: T-Mobile G1, Huawei Ascend P7 mini



IPS is now the most commonly used LCD screen in current smartphones. IPS (In-Plane Switching) is superior to TFT as they provide wider viewing angles and lower power consumption. They also have higher resolutions than TFT panels do. This is what the first major smartphone with QHD resolution, the LG G3, uses.

  • Examples of phones with IPS-LCD: Apple iPhone 6, LG G3, Nexus 5
Retina Display
5S fancy colors-623-80

A Retina Display is a term used by Apple for its products, because the resolution and quality of the screen is so good, the pixels can not be seen by the naked eye. This was introduced with the iPhone 4 in 2010, and has been used quite a bit by Apple since then. It’s worth noting that there is no exact resolution with a Retina Display, as it varies with each device. Apple determines the resolution needed based on the average length the device will be from the viewer’s eyes. So the resolution of the iPhone 4 is 326 ppi, while the iPad 3 is 264 ppi, because the iPhone will be held closer to the eyes usually than an iPad.



AMOLED is the most common iteration of OLED displays used in smartphones nowadays. AMOLED (Active-Matrix Organic Light-Emitting Diode) are essentially more efficient and better looking than regular OLED screens. Again, AMOLEDs are noted for bright colors, higher brightness, and more battery-efficient. This is the display used in the both the 1st Gen Moto X and 2nd Gen Moto X, and it’s what allows them to have their Active Display and Moto Display (respectively) without draining very much power.

  • Examples of phones with AMOLED: Moto X, Moto X (2014), Nexus 6



Super AMOLED is a version of an AMOLED screen made by Samsung. Usually when creating smartphone screens, another layer has to be added to the display to allow for touch interaction of the screen. What Samsung did was include this layer into the creation of the display itself, making it not only the thinnest display on the market, but also the brightest and least power consuming. This is way Samsung displays have such vibrant colors, as the actual display is much closer to the glass than any other display. It also allows for a very responsive touchscreen, more so than most others.

  • Examples of phones with Super AMOLED: Samsung Galaxy S5, Samsung Galaxy Note 4, Samsung Galaxy Tab S

Well, that’s all of the display types. Now, which is the best? That honestly comes down to a matter of preference. IPS-LCD screens offer sharper images, and a wide color range, while AMOLED and Super AMOLED have bright screens, vibrant colors, and lower battery consumption. The best way to know is to look at them side-by-side with the same picture and see for yourself. Even then, you won’t know it fully until you use one display or another for a long period of time, to see how much the battery life matters, or how much the touch responsiveness of the Super AMOLED makes a difference.

What’s your favorite display? Leave us your thoughts in the comments below.


The post A look at current mobile display technologies appeared first on AndroidGuys.

  • Translator

  • Recent Articles

    • The FCC says that 50% of wireless 911 calls are butt-dials
    • Huawei Ascend Mate 7 Hands On (Photos)
    • Oppo VR headset might lunch with Oppo N3 on October 29
    • Who To Follow On Twitter, According To Marc Andreessen
    • Fitbit Surge is a fitness ‘superwatch’ for $250
    • 2014 Camera & Photo Gear Gift Guide
    • Social Gaming points to a Changing Scene
    • Field hockey team’s offense falters in rare scoreless affair
    • Conference woes persist for winless women’s soccer squad
    • Bears sweep weekend with strong five-set wins
    • Hrithik Roshan’s ‘Bang Bang’ creates Box Office Record
    • ASCIIfying
    • So Long #Gamergate. What Did You Teach Us?
    • Talon for Twitter with Material Design available for Android 5.0 Lollipop
    • Weekly Nikon news flash #285
    • When my Android Phone will get Android Lollipop Update?
    • Microsoft fitness band to launch in the coming weeks
    • This Weekend in the App Store — the best free apps, new apps and app updates
    • BYD outs world’s largest battery electric vehicle
    • How I was arrested by the authorities for over optioning my site